AkingFPV EVA4 04 PRO

Here's a look at my new 4" project.

An AkingFPV frame I found on AliX that I thought was an attractive replacement for my ATLAS 4.

• M3/M2 screws
• Plenty of TPU included
• Many colors available
• Designed for various stack/AIO formats
• 4mm arms/ aluminium bloc X cross.
• Compatible with Analog/ 03/ 04/ 04 PRO
• Compatible with 25.5x25.5 AIO / 20x20 / 30x30 stack

It's an interesting frame with a few drawbacks:

• Quite heavy, around 140g with all the TPU.
• 45° AIO mounting is possible, but I preferred to glue the mounting plate and re-drill the carbon plate/aluminum block to avoid using too many screws.
• Sold as a "No props in view" drone, but that's not true; I can see the propellers in the DVR at normal angle mode on the O4 PRO.
• I didn't use the XT60 connector, need to reprint a smaller TPU for better balance.

My drone weighs 240g as shown in the photos. The other TPUs add approximately 15g.

I use 4S 18650 / JP30 / 208g batteries.